• Fanless and silent
  Passive cooling system, no fan noise at all
  Perfect to be used in noise-sensitive environments
  Fanless, dust-free and thus virtually maintenance-free
• 24/7 nonstop operation
  This device is approved for 24/7 permanent operation.
  Requirements:
  - Free circulation of air amongst the PC must be guaranteed.
  - Ventilation holes must be kept clear.
  - If a hard disk is installed, this must also be approved for
  permanent operation by its manufacturer.
• IP54 protected
  The front panel is dust-protected and protected from 
  splashing of water according to protection class IP54.
• Chassis
  Colour: black
  Dimensions:
  - without cable collector box: 29.9 × 20.3 × 5.0 cm (W × H × D)
  - with cable collector box: 29.9 × 27.1 × 5.0 cm (W × H × D)
  100 mm VESA mount capable
  Mounting hole for Kensington lock
  Weight: 2.47 kg net, 3.39 kg gross
• 29.5 cm display (11.6")
  29.5 cm / 11.6" LCD TN display
  Aspect ratio: 16:9 widescreen
  Resolution: 1366 × 768 = 1.05 Megapixel
  Backlight unit: LED, Luminance: 250 cd/sqm (typ.)
  Glass thickness: 3.2 mm, Anti-Glare
• Touchscreen
  Touchscreen function supports fingertip input
  Capacitive Touch Panel with 10-point multi-touch
  Supports input with gloves (PVC, cotton, cotton/linen)
  Stylus pen not supported
• Operating system
  This system comes without operating system.
  It is compatible with:
  - Windows 10 (64-bit)
  - Linux (64-bit, does not support the NFC accessory)
• Processor
  Model: Intel Celeron 3865U (ULV)
  System-on-a-chip architecture (SoC): no chipset required
  BGA1356 package - directly soldered onto the mainboard
  Code name: Kaby Lake-U (7th Generation Intel Core)
  Cores / Threads: 2 / 2
  Clock rate: 1.8 GHz
  L1/L2/L3 Cache: 128 kB / 512 kB / 2048 kB
  Memory controller: DDR4-2133 Dual Channel (1.2 V)
  TDP wattage: 15 W maximum
  Manufacturing process: 14 nm
  Maximum Tjunction Temperature: 100 °C
  Supports 64-bit, VT-x (EPT), VT-d, Enhanced SpeedStep, NX bit, AES-NI, SSE 4.1/4.2
  Integrated graphics engine
• Integrated Graphics
  Intel HD Graphics 610
  GPU clock frequency: 300~900 MHz
  Execution Units (EUs): 12
  Supports DirectX 12
  Supports full H264, H265 8/10 bit, VP8/9, VC-1, AVC hardware decoding
  Supports Quick Sync Video and Clear Video HD technology
• Up to three displays simultaneously
  Two video ports support two additional independent screens:
  1) HDMI 1.4 supports 1920 × 1080 @ 60 Hz or 3840 × 2160 @ 30 Hz
  2) VGA / D-Sub analog video supports 1920 × 1080 @ 60 Hz
  Special conditions for operation in Multi-Monitoring mode:
  1) Clone mode: all displays show the same content at 1366 × 768 resolution
  2) Extended mode: all displays show different content
• BIOS
  AMI BIOS in 8 MByte EEPROM with SPI interface
  Supports Power fail resume / always on
  Supports Wake-on-LAN (WOL) from S3, S4, S5 ACPI states
  Supports hardware monitoring and watchdog functionality
  Supports Firmware TPM v2.0 functionality
• Memory
  2× SO-DIMM slot with 260 pins
  Supports DDR4-2133 (PC4-17000) SDRAM at 1.2 V
  Supports Dual Channel mode
  Supports a maximum of 16 GB per DIMM, maximum total size: 32 GB
  Supports two unbuffered DIMM modules (no ECC or registered)
• Hard disk drive / SSD
  Supports one SATA hard disk or one SATA SSD drive in 6.35 cm / 2.5" format
  The SATA 3.0 interface supports up to 600 MB/s data transfer speed (6 Gbit/s)
  Supports one drive with up to 9.5 mm in height
• M.2-2280 Slot
  The M.2 2280 BM slot provides the following interfaces:
  - PCI-Express Gen. 3.0 X4 with up to 32 Gbps Data Transfer Speed
  - SATA v3.0 (max. 6 Gbps)
  It supports M.2 cards with a width of 22 mm
  and a length of 42, 60 or 80 mm (type 2242, 2260, 2280).
  Supports M.2 SATA SSDs (with B+M key) and M.2 PCIe SSDs (with M key)
• Card Reader
  Integrated card reader supports SD, SDHC and SDXC memory cards
• Webcam
  Integrated 720p HD webcam with 1.0M CMOS sensor
  Resolution: max. 1280 × 720 pixels
• Microphone and speakers
  Front panel with integrated Electret Condenser Microphone (front position) and one 2 W speaker (upper side)
• Integrated Audio
  Realtek ALC269 Audio Codec
  Two analog audio connectors (3.5 mm) on the bottom side: 
  1) Line-out (headphones)
  2) Microphone input
  Digital Audio is supported via HDMI.
• Wired Network
  Intel i211 Ethernet Controller with MAC, PHY and PCIe interface
  Supports 10 / 100 / 1.000 MBit/s operation
  Supports WAKE ON LAN (WOL) from S3, S4 modes
  Supports network boot by Preboot eXecution Environment (PXE)
• Wireless Network (WLAN)
  Chipset: Realtek® RTL8723BE-CG
  M.2-2230AE Combo Module: AzureWave AW-NB165NF
  Two internal antennas support WLAN Transmit/Receive (1T1R) and Bluetooth
  Supports Wireless LAN IEEE 802.11b/g/n at 2,4 GHz
  Max. PHY data rate: 150 Mbps in 802.11n mode
  Supports Bluetooth 4.1
• Front LEDs
  Power LED (blue)
  Hard disk LED (orange)
• Connectors left side
  Power button
  2× USB 2.0 (type A)
  SD card reader
  Hole with Clear CMOS button
  Mounting hole for Kensington lock
• Connectors right side
  Optional: 2× COM port (RS232)
• Connectors bottom side
  HDMI 1.4 (supports digital video and digital audio)
  VGA connector (D-Sub 15 pol., analog video)
  2× USB 3.2 Gen 1 (type A)
  2× USB 2.0 (type A)
  Gigabit Network (LAN, RJ45)
  Audio Line-out/headphones (3.5 mm jack)
  Microphone input (3.5 mm jack)
  DC input for external power adapter (5.5 / 2.5 mm)
  2× COM port (RS232)
• Connectors onboard
  Internal USB 2.0 type A connector for a USB cable
  Always power-on jumper JP7
  Serial ATA (data and power)
  3× USB 2.0 header (all occupied)
  eDP connector (Embedded DisplayPort) - occupied by the display
  LPC connector (occupied)
  I2C connector for optional NFC accessory
• Power adapter
  External 65 W power adapter (fanless)
  Input: 100~240 V AC, 50/60 Hz, max. 1.6 A
  Output: 19 V DC, max. 3.42 A, max. 65 W
• DC Input connector
  DC Input Connector: 5.5 / 2.5 mm (outer/inner diameter)
  The DC-input of the computer supports an external
  power source with either 12V±5% and 19V±5%.
• Included Accessories:
  Quick Installation Guide
  Windows 10 Driver DVD
  External Power Adapter (65W / 19V) with DC cable (approx. 1.7 m)
  Power cord with Euro plug (approx. 1.75 m)
  4× screw M3 × 3 mm to mount the 2.5" drive into the rack
  4× screw M2.5 × 4 mm to mount the rack into the chassis
  EMI shielding gasket (sponge) for 2.5" drive (ca. 8.5 × 10 × 30 mm)
• Optional Accessories:
  1) COM port adapter PCP21 provides two more serial COM ports on the right side
  2) NFC module PNFC01 (no Linux and transaction support)
• Environmental Criteria
  Operating temperature: 0~40 °C
  Humidity: 10~90 %
• Certification and Compliance
  EMI: CE, FCC, FAC, BSMI, RCM, VCCI & TELEC, RED
  Safety: CB, EAC & FSS, BSMI, ETL
  Other compliances: RoHS, ErP Lot 3, Energy Star v6.0 (Level 6)
• Conformity
  This device is classed as technical information equipment (ITE) in class B and is intended for use in the living room and office. The CE-mark approves the conformity by the EU directives:
  (1) 2004/108/EC relating to electromagnetic compatibility (EMC),
  (2) 2006/95/EC relating to Electrical Equipment designed for use within certain voltage limits (LVD),
  (3) 2009/125/EC relating to ecodesign requirements for energy-related products (ErP),
  (4) 1999/5/EC relating to Radio and Telecommunications Terminal Equipment (R&TTE)